WHEN ATHLETE SAFETY IS YOUR TOP PRIORITY
The premier shock pad that reset the standard for artificial turf safety and performance. A totally consistent and stable feel underfoot, PowerBase YSR™ provides the ideal balance between shock absorption and field stiffness, plus rapid drainage even during the most massive storms to keep the game going!
What’s the difference?
We look at a field as a piece of equipment that affects athlete’s safety, and we believe that a safer system for the players drains faster, lasts longer, saves money, and preserves the environment.
PowerBase YSR™ is made from expanded polypropylene, one of the most durable polymers on earth. Each panel is molded individually, allowing precise quality control. This results in a field that is perfectly flat and totally consistent underfoot. It is also infinitely recyclable without ever losing performance. A good artificial sports surface is tuned for the athlete. PowerBase YSR was engineered for schools and recreational fields.
PROVEN, FAST DRAINAGE
Brock PowerBase YSR™ has large lateral channels that transport water to the collector system along the edge. Even where the panels intersect, the drainage channels line up, so there is no interruption in water flow.
Stairstep edge supports the player on the turf and prevents shadowing through the turf.
Shock absorbing bottom of pad structures.
Conical piston shape reacts dynamically to variable running loads for a more natural feel of play.
Large high volume drainage channels.
4mm crush ribs regulate thermal expansion; Accommodates 130-degree change in temperature.
Drain channels are continuous between panels for water flow.
Millions of drain holes on every field line up with channels on the bottom of each pad.
Crush ribs control fit during installation.
WHEN SHOULD I USE POWERBASE YSR?
A. REPLACING AN OLD, HARD SYNTHETIC TURF FIELD. Using a shorter turf and YSR results in better play and greater safety adds additional drainage to the field and gives you a much more consistent surface for footing. Add an organic infill and now you have a field that will perform like a quality natural grass one and be significantly cooler.
B. WHEN BUILDING A PLAYER SAFETY FIRST FIELD.
C. WHEN PUTTING ARTIFICIAL TURF OVER A NON-DRAINING BASE SUCH AS CONCRETE ON A ROOFTOP OR INDOOR FACILITY.
25-years: Drainage>350 per hour; Durability; Gmax guarantee <120 for the turf’s life: HIC guarantee for the life of the turf; Covers cost of field repair or replacement in event of product failure. When used with BrockFILL will also meet One Turf Concept Performance Parameters. Contact Brock for a copy of the warranty.
What’s it made out of -it looks like Styrofoam?
All our Brock shock pads are made from expanded polypropylene (EPP). EPP is an extremely durable product that gives our shock pads the perfect balance of safety, durability, and performance. The only thing that negatively affects EPP is long exposure to UV, and since it’s buried under your turf, it’s never exposed to the sun.
Does it drain?
Yes, PowerBase YSR actually has more and larger perforations than the synthetic turf that sits on top. It can handle all the water that drains through the turf, and it can get rid of it quicker. Independent testing shows that PowerBase YSR drains at over 500”/hour!
Are you sure it will last multiple life cycles of turf?
Yes, we already have over 100 fields where the turf has been replaced, and the Brock has been re-used. In all of those cases, the new field’s test results are the same as when originally installed.
Can you drive on it?
Yes, our PowerBase YSR Warranty allows for load limits that far exceed most turf manufacturer load limits. Additionally, as long as you protect the field with a rigid field protection system, you can host other events, such as concerts and graduations.
How does it handle expansion and contraction in hot/cold climates?
Every PowerBase YSR panel is engineered to withstand the extreme conditions of all climates. Each panel has expansion crush ribs built in to absorb the force of expansion of the panels. Because it is made of one material, we know exactly how much it will expand and contract in the most extreme weather conditions, which is factored into the manufacturing of each panel.
Visit https://www.caddetails.com/main/company/viewfolder?folderID=26751&companyID=5406¤tTab=Content for a complete set of cross sections, specs and more.