Finally, a true replacement for crumb rubber infill.

BrockFILL is an engineered wood particle infill specifically designed for artificial turf. It’s made here in the USA from an abundant species of southern pine that is grown, harvested, and replanted in continuous cycles, making it ideal for a sustainable, renewable organic infill product. Sustainable tree farming for lumber, animal products and biofuels is a multi-billion dollar industry. To create BrockFILL, a tree goes through a proprietary 9-step process and is converted into small, smooth particles that don’t compact over time, are highly durable, and offer better traction and footing, and less splash than crumb rubber. There are no coatings or plastic additives. There is zero waste in production and 100% of the tree is ultimately utilized. And at the end of it’s life, it’s used along with the sand infill as a soil amendment for natural turf, where nature will ultimately turn the particles back into the earth from which they came. A complete loop from nature, back to nature.

It has been proven in many player studies that athletes prefer natural turf to artificial. Those same studies show that artificial turf fields that use shock pads are universally preferred over those that do not. So the least preferred system by athletes is artificial turf directly over stone. Additionally, 1-in-5 concussions happen when the head hits the surface, and lower leg injuries are higher on conventional artificial turf than on natural grass. All this has led to a paradigm shift in thinking about artificial turf safety and why it is essential that it mimics well-groomed natural turf.

It’s what athletes want!

Independent testing of BrockFILL Fields shows that a variety of turf products can be used with the Brock system of a shock pad and BrockFILL, and the field will perform like natural turf. (Far left column on graphs is natural turf performance benchmark). But perhaps the thing players notice most is how much cooler the field is.

Average Critical Fall height, Ball Rebound and Vertical Deformation


OneTurf Concept Test Method

Independent Testing Conducted by Sportslabs USA

Average GMax, Shock Absorption and Rotational Resistance


OneTurf Concept Test Method

Independent Testing Conducted by Sportslabs USA

The goal was to create a system that feels like natural turf and that meant changing the one component athletes hate most: crumb rubber infill. It’s too hot, it smells, it’s a microplastic that invades the environment, it’s unstable under foot and its end of life is an environmental tragedy. As global warming continues, climate change will make these surfaces literally too hot to play on. Finally those problems have been solved.

Now another first: A durable, cool, affordable, best-performance infill engineered for athletes. And it’s organic.

Starting in 2015, the Brock team worked with a specialized group of universities, sports testing labs, PhD scientists, engineers, horticulturists, and several sports science experts to develop a solution to these problems. True to Brock form, we left no research question unanswered.

In a world that is getting too hot, it’s time to cool off.

It is a wonderful example of Man and Nature working together.”

It’s Sourced from Softwood Tree Farming:

An Abundant, Renewable U.S. Resource.


Non-Toxic + Cools the Field + Best Athletic Performance + No Irrigation Required + Sustainably Grown and Made in the USA + Fast Drainage

Tested for… everything.


Humans evolved running on natural surfaces, not a rubberized bouncy turf that changes consistency across the field. BrockFILL feels like natural turf under foot and falls within the optimal traction range (FIFA) without the variability in energy restitution (“bounce”) of crumb rubber.


Keeping infill in the turf is key, so the lower the splash the better. BrockFILL achieves the lowest splash when dry compared to other infills and is even better when damp.


Besides field temperature, abrasion is the most common complaint from athletes about artificial turf. Independent testing from Labosport measures heat generated as a device slides across the turf sample using a mass and speed representative of a sliding athlete. BrockFILL generated the lowest heat score, therefore the lowest abrasion, of any infill, even crumb rubber. Better yet, abrasion is even lower when BrockFILL is damp.


BrockFILL is a significantly cooler infill than crumb rubber and does not require watering. Each BrockFILL particle is naturally hydrophilic, so they absorb natural rainwater and condensation into their core, not just on the surface. Moisture is then released slowly for extended cooling. Plus BrockFILL gains weight when wet, so it doesn’t float or migrate like cork.



This video shows the hydrophilic nature of BrockFILL particles and their high affinity for water. Notice how rapidly it absorbs the droplet, which then provides a prolonged cooling effect on the field. BrockFILL has such an affinity for water that it will absorb condensation from the air in humid climates and self hydrate even when there is no rain. This is important for keeping the field, and athletes, cooler especially in places like Texas and the Southeast where both temperatures and humidity are high.


BrockFILL is an extremely durable organic material. After 20,000 Lisport cycles, the particle dimensions remain virtually unchanged. Additionally, the particles improve over time! They get smoother, further lowering skin abrasion without breaking down.


Like all Brock products, BrockFILL has higher permeability than the turf itself. When tested in turf, the system drains over 50” per hour. Even after 8 years of simulated use with zero maintenance, the field still meets the requirements of International drainage standard. (But you should still maintain your field!)


The BrockFILL system utilizes Brock shock pads to provide the optimal energy absorption and head injury protection, while remaining firm for running: something a rubber and sand field over stone cannot achieve.

And we mean everything.

+ Head Impact Criteria
+ Gmax Test
+ Permeability in the System
+ Shock Absorption
+ Energy Restitution
+ Rotational Resistance
+ Vertical Deformation
+ Ball Rebound / Angled Ball Rebound
+ Ball Roll
+ Flammability
+ Ball Splash
+ Temperature Testing
+ Durability
+ Density at Different Moisture Content Levels

+ Permeability (material only)
+ Total Pesticides
+ Total Herbicides
+ Leachable Pesticides
+ Leachable Metals
+ Total Metals
+ Hexavalent Chromium
+ Mold Growth
+ Bacteria Growth
+ Freeze-Thaw Cycle
+ Insect Resistance
+ UV Exposure
+ Flotation
+ Abrasion

* All test reports available.



The science is undeniable.

When infilled sand and crumb rubber systems were first introduced in the late 1990s they were a significant leap forward for artificial turf sports systems when compared to the original nylon turf. These systems have been used prolifically, but the shortcomings in the design, performance, environmental impact, and safety cannot be overlooked any longer. These systems, long touted as shock-pad free, do not provide the safe surface athletes deserve. They create foul smelling and dangerously hot environments leading to burns, blisters and heat exhaustion, and rubber can create an unnatural, “bouncy” feel which results in the instability that contributes to fatigue, joint stress and lower extremity injuries. The waste and disposal of crumb rubber has reached alarming levels. A typical athletic field is the size of a 500 car parking lot, and can reach temperatures of 180 degrees. Hotter than asphalt! With the effects of global warming, this has to stop.

Years of research, testing, and studies have led to a superior playing surface. Twenty five years from its introduction, it’s time for the crumb-rubber, turf-over-stone system to take its place in history and clear a path for the next generation system for athletes. One that is cooler, firmer, safer, and leaves no scars on the athlete, or the environment.

A typical athletic field is equivalent in size to a 500-car parking lot, and can reach temperatures of 175+ degrees.

The US Consumer Products Safety Commission suggests the use of WOOD and other materials rather than crumb rubber to create a shock-absorbing surface under public play areas.

There are plenty of better uses for waste tires, including road asphalt, Speed bumps, railway vibration absorption and more.


What is BrockFILL?

BrockFILL is an engineered wood particle infill specifically designed for artificial turf. It’s made here in the USA from a species of southern pine that is grown, harvested, and replanted in continuous cycles, making it ideal for a sustainable, renewable organic infill product.

Does BrockFILL break down?

BrockFILL does not break down in practical terms. The average particle size after 20,000 Lisport cycles (equivalent to 8 years of field use) is about 90% of its original size. BrockFILL is far more durable than cork or coconut husk infills and has a 10-year warranty.

More questions?

We have more answers. Check out our complete BrockFILL FAQs page for all the details.

Discover. engage. connect.